1 Are your flow rates below 80 metres³ per hour (350gpm)?

Yes No 

2 Are your discharge pressures below 16 bar (230 psi)?

Yes No 

3 Do you need accurate (± 1%) dosing or metering?

Yes No 

4 Do you need a self-priming pump?

Yes No 

5 Do you need high suction lift?

Yes No 

6 Do you need a pump which can run dry periodically?

Yes No 

7 Would you value having a fully reversable pump?

Yes No 

8 Do valves cause problems on your present pumps?

Yes No 

9 Does your pump damage your suspended solids?

Yes No 

10 Do your fluids have high viscosities and densities?

Yes No 

11 Is your present pump too loud?

Yes No 

12 Is your product shear sensitive?

Yes No 

13 Does your fluid gas - like sodium hypochlorite?

Yes No 

14 Are abrasive products eating your present pumps?

Yes No 

15 Do shaft seals cause problems on your present pumps?

Yes No 

16 Do you need easy maintenance, and short down-time?

Yes No 

17 Is hygienic design and easy, complete cleanablity important?

Yes No 

18 Do you need rapid or frequent product changes?

Yes No 

19 Do you need a pump which won't contaminate your fluid(s)?

Yes No 

20 Would you value easy cleaning and no cross-contamination?

Yes No